Fast, Reliable Wall Insulation Across Boulder City
If your Boulder City home runs hot on one side and cold on the other, the walls are usually the reason. We insulate Boulder City houses built on solid 1930s concrete block and 1980s stucco-on-frame near Lake Mead, and those two wall types need completely different strategies. Call (866) 450-1718 and a live person picks up, day or night. We’ll talk through your wall construction before anyone quotes a number.
Why Walt’s Insulation Summerlin Is Boulder City’s Preferred Wall Insulation Company
We’re the shop down the road, not an 800 number in another state. Boulder City homeowners call us because they want a real license, a published address, and a crew that answers the phone at 9 p.m. when a question can’t wait. Every job here is backed by our Done Right Promise: lifetime workmanship, and if it’s not right, we make it right without the runaround.
Our technicians have up to 26 years of experience, and they’ve worked the whole spread of Boulder City housing, from the federal-planned bungalows off Nevada Way to the custom homes facing the lake. Background-checked, uniformed techs show up on every visit, so you know exactly who’s walking through your door. We answer calls live 24/7, and we give free second opinions on any written estimate you’ve already got in hand.
Our Wall Insulation Services in Boulder City
Wall work in Boulder City isn’t one job. It’s two, split by construction. Here’s how we handle each one.
Drill & Fill Wall Insulation
For the 1980s and 1990s stucco-on-frame homes near Lake Mead, drill-and-fill gets insulation into wall cavities still holding original R-11 batts. We drill small holes, blow in material, and patch clean. On these Boulder City homes we air-seal first, because the wind off the lake pushes through gaps that new insulation alone won’t stop. Call (866) 450-1718 to schedule an assessment.
Injection Foam Wall Insulation
Injection foam is our pick when a Boulder City frame wall has air leaks we can’t reach any other way. The foam expands into the cavity and seals as it cures, which matters in a high-desert basin where summer hits 100°F and winter nights drop hard. We use products from Demilec and Owens Corning, and we size the foam to the wall, not the other way around. Drill-and-fill or injection foam? The answer is construction-driven. Our team walks you through it.
Exterior Wall Insulation
Some Boulder City walls have no cavity to fill at all. That’s the historic core, where solid concrete-block bungalows need rigid board on the outside to build an insulation layer that wasn’t there in the 1930s. We plan the exterior access carefully so patched block doesn’t get left exposed. For the stucco homes closer to the lake, exterior rigid board over the existing wall gives you a continuous layer the batts never provided.
Interior Wall Soundproofing
Boulder City homes near the highway and the Lake Mead wind corridors pick up noise through interior walls. We dense-pack those cavities to cut sound transfer between bedrooms and living spaces. It’s the same drill-and-fill approach, sized for sound rather than heat. Our Wall Insulation team handles interior soundproofing across Boulder City and the surrounding valley.
Trusted Brands We Service in Boulder City
We install products from Owens Corning, Demilec, Johns Manville, and GreenFiber, and we match the material to the wall, not the other way around. Solid block gets one treatment, framed cavities get another. We don’t stock parts or materials locally, so we order exactly what your Boulder City wall calls for and turn jobs around fast. If a brand or spec matters to you, tell us on the call and we’ll build the quote around it.
Common Wall Insulation Problems We See in Boulder City Homes
- Drilling solid block without planning exterior access. Historic-core bungalows have concrete-block walls with no cavity to blow into. Crews that drill first and think second leave patched block exposed or walls still uninsulated.
- Injection foam over unsealed 1980s stucco walls. Lake Mead wind-driven air moves through gaps the foam never reached. Air-sealing has to come before the insulation, not after.
- Blown fiberglass in shallow original attics. The 1930s bungalow attics are often too tight for standard blown fiberglass. Assuming it fits wastes material and leaves the top plate cold.
- Original R-11 batts that have settled and compressed. Many 1980s Boulder City homes still hold their first-generation batts. Twenty-plus years of desert temperature swing leaves them thin and gaps at the studs.
Pricing for Wall Insulation in Boulder City, NV
Wall insulation in Boulder City runs $1,800 – $3,200 for a typical single-story home when the walls are framed and we can drill-and-fill. Solid concrete-block bungalows in the historic core run more, usually $3,500 – $6,500, because the block has to be cut or rigid board installed on the exterior. Injection foam on a 1980s stucco-on-frame home lands around $2,200 – $4,000 depending on wall area and how much air-sealing is needed first. What moves the number: wall construction, square footage, whether we’re working from outside or inside, and how much prep the openings need. Estimates are free. We’ll give you a written number and a free second opinion on any estimate you already have.
We Also Serve Cities Near Boulder City
The same wall work reaches across the valley. We serve Henderson, Whitney, Paradise, and Enterprise, and Boulder City homeowners get the same crew and the same Done Right Promise. If you’re just over the hill, call (866) 450-1718. More about Wall Insulation in Boulder City and the surrounding area is on our city page.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Wall Insulation in Boulder City
No, not by blowing it in, because solid concrete block has no cavity to fill. On those historic-core bungalows we either cut access through the block or install rigid board on the exterior to build an insulation layer that wasn’t there in the 1930s. Call (866) 450-1718 and we’ll tell you which route fits your wall.
Because the lake wind pushes through gaps that new insulation alone won’t stop. Those stucco-on-frame homes still hold original R-11 batts, and the wind infiltration is a bigger heat loss than the thin batts. We air-seal first, then drill-and-fill or inject foam. Estimates are free; call (866) 450-1718.
Yes, it changes the plan. The 1930s bungalow attics are often too shallow for standard blown fiberglass, so the wall strategy has to account for the tight top-of-wall detail. We assess the attic before we quote the walls. Call (866) 450-1718 to book the assessment.
Drill-and-fill blows loose material into framed cavities through small holes; injection foam expands to seal air gaps as it cures. For 1980s stucco-on-frame homes near the lake, injection foam usually wins because it stops wind infiltration. For newer framed walls, drill-and-fill is often enough. Call (866) 450-1718 for a straight answer on your wall.
Often yes, and it’s sometimes the only way to add insulation without gutting the interior. On Boulder City’s concrete-block bungalows, rigid board on the outside builds the missing insulation layer and can be finished over. We’ll confirm what your wall will take on a free estimate; call (866) 450-1718.
Wall insulation in Boulder City comes down to construction, not guesswork. Whether you’re in the historic core or near the lake, we’ll match the method to your actual wall before anyone touches a drill. Call (866) 450-1718 for a free estimate, and a live person answers, 24/7.
Written by the team at Walt’s Insulation Summerlin.