A Walt's company - serving Summerlin, NV
R

Reflectix Wall Insulation in Summerlin, NV

Reflectix Wall Insulation in Summerlin: What to Know First

If you own a home wrapped in Reflectix radiant barrier and your walls are underperforming, we install wall insulation that works with the product instead of fighting it. Most Summerlin Reflectix wall jobs wrap up in one day: injection foam or drill-and-fill behind the existing barrier, wall soundproofing on interior partitions, and exterior wall work where a wall is open. Our pricing is upfront and fixed in writing before we start, and the work is backed by the Done Right Promise for as long as you own the home. We answer the phone live at (866) 450-1718, day or night.

Call (866) 450-1718

This page is for Summerlin homeowners who already have Reflectix product on the house, or who are buying a house that does, and want an honest read on what’s behind the wall and what it takes to fix it. We’re an independent Reflectix service provider. Walt’s Insulation Summerlin is not affiliated with or authorized by Reflectix.

How Reflectix Products Fail – and How We Fix Them

Reflectix isn’t a wall insulation product on its own. It’s a reflective radiant barrier, and it does real work as a radiant-control layer. What it doesn’t do is slow conductive heat or fill a cavity. When Summerlin homeowners call us about Reflectix, the complaint is almost always the same: the house still feels hot in July and cold in January, and the bill never came down. Here’s what we actually find behind the wall.

  • Radiant barrier installed with no air space. Reflectix’s own installation guidance calls for a facing air space to reflect radiant heat. In a lot of Summerlin tract homes, the product got stapled flat against wall sheathing or drywall with no gap at all. Without that gap the reflective surface has nothing to reflect into, so the assembly performs like a thin sheet of foil instead of a radiant barrier. We open or fur out the cavity to restore the air space and add real cavity insulation alongside it.
  • Reflectix Double Reflective (R-21 claim) sold as a stand-alone wall solution. This is the most common mix-up we see. The R-value printed on the Double Reflective roll assumes a specific installation with air spaces on both sides, tested in a lab assembly. Stapled into a 2×4 stud bay and covered with drywall, that number falls far short. We don’t remove the product. We keep it as the outer radiant layer and fill the cavity behind it with blown or injected insulation so the wall actually holds heat.
  • Reflectix R-21 on stud walls with zero backfill. Builders used the R-21 Reflectix roll as a stand-in for fiberglass in some Summerlin production homes. The wall cavity behind it stayed open, which means a path for air to move and a cold surface for condensation. In our high-desert swing from 105°F afternoons to 40°F nights, that cavity condenses. We drill and fill the cavity and confirm the reflective layer stays intact as a vapor-aware outer face.
  • Tape and seam failures at penetrations. Reflectix is only as good as its seams. Outlet boxes, electrical penetrations, and window rough openings get taped by whoever’s on site, and in Summerlin’s sun-baked stucco walls we regularly find that tape has let go after a few summers of thermal cycling. Once a seam opens, the barrier loses continuity and the whole wall assembly leaks air. We re-seal the penetrations with proper foil tape rated for the temperature swing, then seal the cavity separately.
  • Reflectix bubble insulation acting as a moisture trap. Single-reflective bubble product installed facing a wet exterior in the wrong climate zone can trap moisture between the foil and the sheathing. Summerlin’s dry climate usually helps here, but monsoon-season humidity plus an AC-driven vapor gradient can still push moisture to the wrong face. We read the assembly before we inject anything, because foam against a moisture trap makes the problem worse, not better.

Our Reflectix Wall Insulation Process

Every Reflectix wall insulation job we do starts with a look at what’s actually in the wall, because the fix depends on it.

  1. 1
    The call. A live person answers at (866) 450-1718, any hour. We walk through the symptoms: which walls, which rooms, whether the house was built with Reflectix or retrofitted, and what the bill looks like.
  2. 2
    In-wall diagnostics. On-site, we check the assembly with a moisture meter and thermal read: is there an air space, is the reflective layer continuous, are there moisture signs, and is the cavity empty or partially filled. This is where we catch the Reflectix-with-no-air-space problem before we touch the wall.
  3. 3
    The parts decision. We don’t touch the Reflectix layer itself unless it’s damaged. Where a reflective layer needs replacement, we use a quality radiant barrier rated for the assembly, not a generic aftermarket roll, and we tell you why. OEM Reflectix replacement rolls stay an option when the existing product is intact and matching seals matter. Where cavity fill is the fix, we use injected foam for tight, fully filled retrofits and blown fiber (Owens Corning, Johns Manville, GreenFiber) where the framing permits.
  4. 4
    The install. Drill-and-fill and injection foam behind the existing barrier using small, patched penetrations so we don’t strip and refinish the whole wall. Interior wall soundproofing where a bedroom or media room shares a wall gets a denser approach. Exterior wall insulation where a wall is open during a remodel gets a full-cavity build.
  5. 5
    The verification. We check the wall for gaps, confirm the reflective layer is intact and the cavities are fully filled, and run a final check on penetrations and seams before drywall or patch work goes back.
  6. 6
    The guarantee. Every job is backed by the Done Right Promise for life of the workmanship. If something isn’t right, we come back and make it right. No runaround.

What Reflectix Wall Insulation Costs in Summerlin

Every home is different, but here’s what Summerlin homeowners typically see for Reflectix wall work, based on the walls, the square footage, and how much of the assembly needs opening.

Job Typical range
Drill-and-fill wall insulation behind existing Reflectix (per wall section) $1.50 – $4.00/sq ft of wall
Injection foam wall insulation, retro behind Reflectix barrier $3.00 – $6.50/sq ft of wall
Interior wall soundproofing on shared walls $1,200 – $3,500 for a typical room
Exterior wall insulation where the wall is open $2.50 – $5.50/sq ft of wall
Reflectix seam and penetration re-seal (standalone) $300 – $750

What moves the price: how much wall we need to reach, whether the cavity is empty or partially filled, whether moisture shows up and needs addressing first, and whether you want the drywall patched or left to your drywall crew. Reflectix double-reflective product in good condition usually saves you money because we keep it as the outer layer instead of stripping it. Estimates are free, and we’ll give you a second opinion on any written quote from another contractor at no charge. No trip charge inside our service county, $40 off any repair over $200, and 10% off for seniors and veterans, always. Call (866) 450-1718 for an exact number.

Why Summerlin Homeowners Call Walt’s Insulation Summerlin for Reflectix Work

We’ve been doing wall insulation since 2000, and our technicians bring up to 26 years of experience to a Reflectix wall. That’s long enough to know the difference between a radiant barrier doing its job and a radiant barrier being asked to do something it was never meant to. We’re locally owned and owner-operated, with a published address and license, and a real person answers every call, 24/7. No voicemail. No call center.

Every job is backed by the Done Right Promise, our lifetime workmanship guarantee, and the technicians who show up are background-checked and uniformed, so you know who’s in your house. When a Reflectix wall needs more than cavity fill (radiant barrier repair, air sealing, crawl space work), we handle it under one call. We also work with Owens Corning, Rockwool, Icynene, Johns Manville, CertainTeed, Demilec, and Knauf products when the assembly calls for it. We’re the one down the road.

FAQs

Need Insulation help nationwide? Licensed & insured · 1-hour response · free estimates
Call (866) 450-1718
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Walt's Insulation Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch